QUALITY & ENGINEERING
Quality Control & Engineering
Built Into Every Part
Inspection is integrated throughout machining and finishing — not just at the end. CMM verification, gauge-checked threads, and DFM review keep your parts within ±0.005mm and consistent across the batch.
- ✓ CMM-verified every batch
- ✓ Tolerance to ±0.005mm
- ✓ ISO 9001 quality system
- ✓ Free DFM review on every quote
● CMM
● ±0.005mm
QUALITY PROCESS
Inspection at Every Stage
Quality is engineered into the workflow — from incoming material to final shipment — so deviations are caught early, not after delivery.
Material & DFM Review
Drawings and tolerances reviewed for manufacturability; material certs verified on incoming stock.
✓ Catch risks before machining.
First Article Inspection
First part fully measured against drawing before the batch runs.
✓ Confirm setup & tolerances.
In-Process Checks
Critical dimensions verified during machining to hold consistency across the run.
✓ Reduce drift mid-batch.
Final CMM & Visual
Final dimensional, thread and surface inspection before shipment.
✓ Verified before it leaves.
INSPECTION CAPABILITY
CMM & Dimensional Verification
Calibrated measuring equipment and documented checks give you traceable, repeatable quality on critical parts.
DIMENSIONALCMM
Dimensional Inspection for Assembly Accuracy
Critical dimensions — hole positions, flatness, mating surfaces and threaded features — are measured to improve assembly consistency and reduce field issues.
Hole position & pitch · flatness on mating surfaces · thread fit (go / no-go) · surface finish & appearance.
📄 Inspection reports provided based on your project requirements.
TRACEABILITYDOCUMENTED
Traceable Quality & Documentation
Material certificates, dimensional reports and batch records can be supplied so your quality team has full traceability on mission-critical parts.
Material certs · dimensional reports · FAI documentation · batch traceability records.
EVERY BATCH
Four Checkpoints We Run on Every Batch
Consistent checkpoints catch deviations before they reach your assembly line.
4 INSPECTION FOCUS AREAS
GEOMETRY
Hole Position Verification
Critical mounting hole locations inspected to reduce assembly deviation.
COSMETIC
Surface Finish Inspection
Surface quality, finish variation, and cosmetic defects checked before shipment.
THREADING
Thread & Tapping Inspection
Threads verified by gauging to ensure installation reliability.
STABILITY
Flatness & Deformation Control
Flatness inspection improves stability for thin-wall parts and plates.
ENGINEERING SUPPORT
Engineering & DFM Support
Our engineers review your design before production — flagging risks, confirming tolerances, and suggesting cost-saving improvements without compromising function.
BEFORE PRODUCTIONFREE DFM
Design-for-Manufacturability Review
Send your STEP / DXF / IGES file and we review manufacturability, confirm achievable tolerances, and flag features that add cost or risk — before any chips are cut.
Manufacturability feedback · tolerance confirmation · material & finish advice · cost-reduction suggestions.
TIGHT TOLERANCE±0.005mm
Holding Tight Tolerances Repeatably
Calibrated machines, controlled fixturing and in-process inspection keep parts within spec across the full production run — not just on the first piece.
Calibrated VMC & 5-axis · single-setup machining · in-process CMM · controlled deburring & finishing.
STANDARDS & EQUIPMENT
Standards, Certifications & Inspection Equipment
A documented quality system and calibrated equipment back every part we ship.
PART 01 · QUALITY SYSTEM
How we keep quality consistent
ISO 9001 Quality System
Documented processes and quality management across machining and inspection.
Calibrated Equipment
CMM, gauges and profilometers maintained on a calibration schedule.
Material Traceability
Material certificates verified and recorded for mission-critical parts.
Inspection Reporting
Dimensional and FAI reports available based on project requirements.
START YOUR PROJECT
Get a free DFM review and quality plan
Share your STEP, DXF or IGES file. Our engineers confirm manufacturability, tolerances, and inspection requirements, then reply with pricing & lead time within 24 hours.